Fully Automatic Corrugated Flexo Printing Machine , Corrugated Box
Printing Machine Main Motor Frequency Convert
1, the paper arm can be manuallu y or automatically operated, with
insurance institutions to prevent the paper arm suddenly fall, to
ensure the safety of operators.
2, bed lift strong chain driven.
3, stack height 1600mm.
4, bed with the cardboard heap height automatically adjust the tilt
height, lift motor, with brake function, bed to keep a fixed
position will not decline.
5, then appropriate to widen the cardboard.
GEAR PART :
High precise gear transmit , adop 40cr alloy steel , quenching
treatment , high precise grinding gear treatment process , 6 cllass
accurate , the gear high strength , work steay ,wear resisting ,
,lubricating adopt the sealed lubricate system ,assure the tranmit
accurate and use life , hardness HRC58-62 , use life long ,can keep
long time print accurate .
Installation and commissioning
If need the installtion ,buyer need pay the double way ticket ,
food ,hotel , 80usd /day
Note: Customer-owned prepare part
1, compressed air pipe, compressor.
2, power, wire connected to the operating cabinet and line
3, water, water pipes.
4, water, electricity, gas foundation plane installation of civil
5, equipment with oil, lubricants, hydraulic oil, grease and high
【1】 electric control machine from the alarm bell, continuous
ringing warning, to ensure the safety of workers.
【2】 drive shaft with friction clutch, to avoid misuse and damage to
【3】 pneumatic interlock device.
【4】 The host motor starts the protection device. (The machine is
not locked, the host can not start running)
2 . leading edge roller type feeding system
【1】 suction auxiliary feeding paper fan 7.5KW, according to the
different bending conditions of cardboard, air volume adjustment,
To ensure smooth paper supply. Use the brush to remove the
Dust, scraps of paper and other debris, improve the printing
 slotted with a chain control switch, control emergency stop
【3】 The paper lift and down adopt the air cylinder ,the action
 the use of Shandong "Komori" front edge roller feed system,
simple operation, high precision. The amount of extension can be
Strong adaptability. Speed transmission more stable, suitable for
warping, thin cardboard transmission, the effect is obvious.
【5】 side baffle, rear box position by the screw electric
adjustment; front baffle upper and lower gap position manually
【6】 skip feeding device (according to the need to choose continued
or sheet feeding).
【7】 PLC control, man-machine interface, menu storage, printing
plate correction, printing speed, quantity, time and the Department
|Name of parameter||KSJ-900||KSJ-1200||KSJ-1400|
|Color Group||Everything can be quipped according to users’ needs|
|Printing Paper||A,B,C,A/B,B/C and A/B/C Corrugated Cardboard(Maximum gap 11mm)|
|Production Speed||180 Pieces/min||170 Pieces/min||160 Pieces/min|
|Economic Speed||170 Pieces/min||160 Pieces/min||150 Pieces/min|
|Standard Printing Plate Thickness||7.2mm|
|Slot Width x Max.depth|
7mmx220mm 7mmx300mm 7mmx350mm
(Number of blade and slot depth may be added)
|Printing Roller Dia||300mm||408mm||480mm|