KYG-1400 Type Flexo Printing Corrugated Cardboard Box Printing Die
Cutting Sotting Machine
【1】 electric control machine from the alarm bell, continuous
ringing warning, to ensure the safety of workers.
【2】 drive shaft with friction clutch, to avoid misuse and damage to
【3】 pneumatic interlock device.
【4】 The host motor starts the protection device. (The machine is
not locked, the host can not start running)
2 . leading edge roller type feeding system
【1】 suction auxiliary feeding paper fan 7.5KW, according to the
different bending conditions of cardboard, air volume adjustment,
To ensure smooth paper supply. Use the brush to remove the
Dust, scraps of paper and other debris, improve the printing
 slotted with a chain control switch, control emergency stop
【3】 The paper lift and down adopt the air cylinder ,the action
 the use of Shandong "Komori" front edge roller feed system,
simple operation, high precision. The amount of extension can be
Strong adaptability. Speed transmission more stable, suitable for
warping, thin cardboard transmission, the effect is obvious.
【5】 side baffle, rear box position by the screw electric
adjustment; front baffle upper and lower gap position manually
【6】 skip feeding device (according to the need to choose continued
or sheet feeding).
【7】 PLC control, man-machine interface, menu storage, printing
plate correction, printing speed, quantity, time and the Department
1 printing roll (plate roll)
【1】 diameter of ¢ 330 mm
 high-quality steel surface grinding, axial reference scale,
hard chrome plating.
 to do the balance correction, smooth operation, to adapt to
【4】 ratchet fixed scroll plate, with hanging plate ditch, to adapt
to the rapid version of the installation convenient and quick.
【5】 full version of hanging slot, for 10 mm hanging version of the
【6】 loading and unloading printing plate, foot switch electric
control is reversing.
【7】 printing roller axial manual traverse, the maximum movement of
2 printing press roll
【1】 diameter of ¢ 155 mm.
 the use of high-quality seamless steel pipe surface grinding,
dynamic balance correction, smooth operation, hard chrome plating
【3】 printing pressure roller cross slider-type dial to manually
adjust the adjustment range of 0 to 12 mm. Adjustment does not
affect Gear clearance to ensure transmission accuracy.
3 Feed the upper and lower rollers
【1】 on the roll: diameter ¢ 71 mm seamless steel pipe, with three
paper feed ring.
【2】 the next roll: diameter ¢ 134.6mm seamless steel pipe, surface
grinding, hard chrome plated
【3】 feeding roller cross slider-type dial dial manually adjust the
adjustment range of 0 ~ 12 mm. Adjustment does not affect teeth
Wheel clearance, to ensure transmission accuracy.
4. steel anilox roller rubber roller set ink system
 diameter of ¢ 176mm.
【2】steel surface grinding, repression reticulate, hard chrome
 alance correction, smooth operation.
【4】mesh number is 180,200,220,250 lines / inch selection. Option
ceramic roller 300line/inch
【5】 with the feed system pneumatic automatic lifting device. (When
feed paper pr the anilox roller is lowered and touched with print
plate ,stop feed paper
anilox roll is up and the plate is separated)
【6】 Anilox roller with wedge-type clutch, even ink, easy to clean
【7】 rubber roller diameter ¢ 186 mm.option the doctor blade system
【8】 steel pipe surface wrapped with wear-resistant rubber, and do
the balance correction.
【9】 rubber in the special high grinding, ink transfer effect is
good. Quick clearance fine-tuning self-locking device to ensure
uniform ink. The amount of uniform ink system, the conversion
effect is good, to extend the life of rubber roller.
|Name of parameter||KSJ-900||KSJ-1200||KSJ-1400|
|Color Group||Everything can be quipped according to users’ needs|
|Printing Paper||A,B,C,A/B,B/C and A/B/C Corrugated Cardboard(Maximum gap 11mm)|
|Production Speed||180 Pieces/min||170 Pieces/min||160 Pieces/min|
|Economic Speed||170 Pieces/min||160 Pieces/min||150 Pieces/min|
|Standard Printing Plate Thickness||7.2mm|
|Slot Width x Max.depth|
7mmx220mm 7mmx300mm 7mmx350mm
(Number of blade and slot depth may be added)
|Printing Roller Dia||300mm||408mm||480mm|